E-Form Change Control

Form Name : RVD 1

Revision History

Revision Number	Date	Change
2.0	26/01/1999	Initial Release
2.1	15/04/1999	Check on track to not use vehicle width for cab-chassis Hidden "variant use" checks changed to correctly identify transmission mass and tyre use columns Auto-calc of minimum acceptable wheel arch clearance added Wheel arch data collected for each variant "Bell" cells for tyre table enhanced to check for variant use with no size etc "Bell" cells set to never print Widened Transmission mass variation columns to print double digit values Variant Name cell enlarged and set to max 24 characters 2^nd cell for No Doors Side added Transmission type list extended to cover AWD, cells re-sized to suit. VIN cells widened Major Dimensions and wheel arch cells changed to require "##" for cab/chassis Checks on VIN characters corrected so as to not all point to Variant 1 Comparison of braked to unbraked trailer set to > not >= . Document Ref cells added to pages 2 & 3. Trigger added Raised to issue 2 Layout changes for filler 2.6 Ctrl-? For cell help added Issue number incremented Moved remarks box down and made cab/chassis box taller Ungreyed issue date cell Increase max wheelarch clearance to 800, change x to bell Vehicle is new/used added and model year range added Fixed so that braked trailer mass can = unbraked trailer mass
2.2	15/07/1999	Used vehicle "Year To" changed to allow current model year, not just current year.
2.3	15/10/1999	FORS logo replaced by DoTRS logo. Font size for "FI Carbs" column decreased from 10 to 9 to allow all characters to print.
2.4	18/11/1999	CVT transmission option added with check that num gears = 1. Issue number deleted, replaced with auto-insert revision number. Fit To Sides added to View menu.
2.5	12/02/2003	Update Departmental Logo.
2.6	14/07/2006	Allows additional AMVCB charts to be used in Engine, VIN and Compliance plate locations. Description of changes made required in remarks field when Superceding or Correcting RVD.
2.7	10/07/2008	Heading in section "Major Dimensions" changed from "Ground Clearance" to "Running Clearance" to reflect amendments to ADR 43/04. Calculated minimum acceptable vertical measurement changed to reflect amendment to ADR 43/04.
2.8	11/09/2008	Add notes to define suspension data measurements.
2.9	9/07/2009	Add option of "Continuously Variable Transmission AWD" (CVTAWD) to Transmission Type drop down list.
2.10	04/09/2009	Remove ability to list variants with different number of doors in the same column.
2.11	30/08/2010	Correct fault in Transmission Section (Forward gears) regarding AWDCVT.
2.12	11/02/2011	Correct coding fault with GVM fields.
2.13	21/03/2014	Add privacy notice. Update departmental logo.
2.14	20/07/2018	Insert note about GCM and towing mass in relation to second stage manufacture, as well as corresponding warning if attempt is made to use Remarks field for these. Reorder columns in Engines table to place Motive Power first and no longer require responses for columns that are irrelevant for Electric and Battery Only. In Tyre and Rim section, allow decimals in Rim Offset and remove bells from blank front or rear Track fields where the given rim/tyre size is not used on that axle. Correct note numbering. Update departmental logo. Replace privacy notice text with field for ease of future updating.